Active system transfer function
\[ G(s)= \frac{K}{(T_1s+1)(T_2s+1)(T_3s+1)} \]
Closed-loop stability — —
Gain margin — —
Phase margin — —
Critical point −1 + j0 Closed-loop critical pt
― Pos Freq -- Neg Freq ● Phase Crossover ● Gain Crossover
Move your pointer over the curve to inspect a point.

How to read the results

Gain margin (GM)

The factor by which the open-loop gain can increase before reaching the −1 point at a phase crossover (−180°). A positive finite margin in dB indicates some gain increase is available.

Phase margin (PM)

The additional phase lag required at a gain crossover (|G(jω)| = 1) to reach −180°. A positive phase margin is generally associated with a stable feedback system, but stability must be assessed using the full system.

Stability

This simulator checks the closed-loop characteristic polynomial for the three supported model types. This avoids inferring stability from whether a plotted curve merely appears close to or far from −1.

Technical note: The plotted frequency response is sampled over a finite frequency range. The integrator has a pole at the origin, so its Nyquist contour requires a limiting indentation around the origin. The displayed plot is a frequency-response visualisation, not a complete contour construction. Stability is determined separately from the exact characteristic polynomial for the selected model.